Sanyo THX1852, UHX2452, UHX0752, UHX1252, UHX3652, UHX1852 Procedure, Simple Settings Function

Press and hold the

Remote Control Functions

3.Timer Remote Controller (RCS-TM80BG)

15.Simple Settings Function

•This allows the filter lifetime, operating mode prior- ity change, central control address, and other set- tings to be made for an individual or group-control indoor unit to which the remote controller used for simple settings is connected.

When this function is engaged, operation stops at the individual or group-control indoor unit to which the remote controller for simple settings is con- nected.

<Procedure> 7

and buttons simultaneously for 4 seconds or longer.

“ ,” unit No. “ ” (or “ ” in the case of

group control), item code “ ,” and settings data

“ ” are displayed blinking on the remote controller LCD display. At this time, the indoor unit

fan (or all indoor unit fans in the case of group

control) begins operating.

If group control is in effect, press the button and select the address (unit No.) of the

indoor unit to set. At this time, the fan at the

indoor unit begins operating.

*If unit No. “ ” is displayed, the same setting will be made for all indoor units.

Press the temperature setting / buttons to select the item code to change.

Press the timer time / buttons to select the desired setting data.

*For item codes and setting data, refer to the following page.

Press the button.

(The display stops blinking and remains lit, and

setting is completed.)

Press the button to return to normal remote controller display.

2

3

4

1 6 5

1

1

2

2

3

3

4

4

5

5

6

6

7

7

2-31

8

8