Sanyo UHX1852, UHX2452, UHX0752, UHX1252 Canceling the outing function, Outing function indication

Remote Control Functions

3. Timer Remote Controller (RCS-TM80BG)

Setting the Outing Function

1. Press and hold for more than 2 seconds to display the upper limit temperature setting screen.

, and the upper limit temperature start fl ashing.

(The default value of the upper limit temperature is 99°F (37°C).)

2.Press / to select the upper limit temperature and press to fix the

value. The lower limit temperature setting screen is displayed.				2
3. Press	/	to select the lower limit temperature, and press	to fix the

value. The outing function setting is completed. (The default value of the lower limit temperature is 50°F (10°C).)

* The unit returns to the normal mode if is pressed or there is no operation made for 3 minutes during the setting. In this case, all the settings in progress will be lost.

Canceling the outing function

Press and hold for more than 2 seconds while the outing function is set.

Outing function indication

3

1

1

2

2

3

3

4

4

5

5

6

6

7

7

8

8

Outing function indication	Status
Off	The outing function is not set.
Flashing	The outing function is now being set, or under operation.
Lighting	Although the outing function is set, not under operation.

Note

A remote controller loses outing function operation information when it is cut for more than one hour during the outing function operation by electricity. It reverts from the blackout, and an air conditioner does not drive in outing function when operation is started. At this time, an air conditioner does not stop at outing function.

2-28