mode
Before using good' sleep mode, set the current time.(For setting current time, refer to the page 18.)
For a comfortable sleep, the air conditioner will operate it Fall asleep Sound sleep Wake up from 
mode.
When the air conditioner is on and in cool/heat mode
1. Press the 
button on the remote controller.
indicator appears and O timer indicator starts blinking on the remote controller display.
2. Press the 
button to set the time.
You can set the time in half hourly unit from 30 minutes ~ 3 hours and hour unit from
3 hours ~ 12 hours.
Operating hour can be set from minimum 30 minutes to maximum 12 hours.
Default operation hour is set to 8 hours.
3. Press the Set/Cancel button to active it.
O timer indicator stops blinking and reserved time will be displayed for 3 seconds. Then the air conditioner operates in good’sleep mode.
If you don’t press Set/Cancel button within 10 seconds after pressing the
button, the air conditioner will return to previous status. Check O
timer indicator and 
indicator on the indoor unit.
Cancel Press the Set/Cancel button once again.
You can set the desired temperature by 1˚C in the range of 16˚C~30˚C.
Fan speed will be adjusted automatically according to the 
mode.
However, I f you select 
mode while heating operation is on, you can adjust fan speed.
When the 
mode is on.
In Cool mode : Air flow direction will be adjusted automatically.
In Heat mode : Adjusting air flow direction is available.
ENGLISH
Temperature and fan speed changes in 
mode
•Fall asleep: Eases you into sleep by dropping the temperature.
•Sound sleep: Relaxes your body and raises your temperature slightly.
•Wake up from 
mode: Allows you to wake up from comfortable intermittent air and it makes you feel refreshed.
• Set Off timer in | mode over 5 hours. You fell disturbed sleep if the | is set too short or long |
because the default is set to |
| |
•If the 
mode is set less than 4 hours, the operation will stop at the same time.
If the 
mode is set over 5 hours, it will run as Wake up stage from the last one hour before it stops.
•Recommended set temperature is between 25˚C~27˚C for cooling and 21˚C~23˚C for heating.
17
Junfrau |
|
| |
|
| ||
|
|
|
|