Pioneer DVR-650H-S manual VCR Plus+ programming with the power off, Clear

Recording

Checking/editing timer recording settings

You can check and/or edit the timer recording settings made by the VCR Plus+ system by selecting Details from the PlusCode# setting screen.

	ENTER
1	Select ‘Details’ from the

PlusCode# setting screen.

The Timer Programme Set screen appears, filled out with the timer recording details.

2Check and edit the fields as necessary.

See Setting a manual timer recording on page 42 for more on this.

	ENTER
3	Select ‘Store Programme’ to

save the timer programme and exit.

05

VCR Plus+ programming with the power off

You can enter a PlusCode programming number when the recorder is in standby.

Note that the recording is always made to the HDD. If you want to record to a DVD disc, you’ll need to switch on the power and use the full VCR Plus+ programme screen.

Important

•You can’t use this feature until you have set up the guide channels. See VCR Plus+ CH Setting on page 106.

•You can’t change the recording mode.

•You can’t program daily or weekly timer recordings.

1 Press ‘VCR Plus+’.

The front panel display shows the current recording mode and prompts you to enter the PlusCode programming number.

2Use the number buttons to enter the number.

•To clear the last digit entered, press

CLEAR.

3Press ENTER.

The display shows the timer settings:

Date Start time	End time HDD and
Recording channel	Recording mode

•If CODE ERROR appears in the display, check that the number is correct and that the guide channel is set (see VCR Plus+ CH Setting on page 106), then set the timer recording again.

•If CAN’T SET appears in the display, it means that although you entered a valid number, the programme has already finished.

41

En