14The Initial Setup menu

Setting

Options

Explanation

 

Manual CH Setting

Next Screen

Proceed to the next screen if you need to adjust any

 

 

of the settings made by auto tuning. Select your

 

 

country, then proceed to the manual channel setting

 

 

screen:

 

 

 

• Change channel presets using the

PREV/

 

 

NEXT buttons.

 

 

 

• To skip the displayed channel (because there is no

 

 

station assigned to that channel), change the Skip

 

 

setting to On.

 

 

 

• To manually fine tune the channel, change the AFT

 

 

setting to Off then adjust the Level setting.

 

 

 

VCR Plus+ CH

Next Screen

Proceed to the next screen to assign channel

Setting

 

numbers to the guide channels as necessary. Look in

 

 

your TV guide to see which channel numbers should

 

 

be assigned to which guide channels. Press ENTER

 

 

when your done to leave this screen.

 

 

 

 

 

Video In/Out

 

 

 

 

 

 

Input Colour

Next Screen

Proceed to the next screen to set the input colour

System

 

system for the external input and the built-in TV

 

 

tuner. Use the CH +/– buttons to change the preset.

 

 

On the default Auto setting the recorder can

 

 

generally correctly detect whether the input signal is

 

 

3.58 NTSC or PAL-M, but in some cases you may

 

 

have to set it manually if the picture is displayed

incorrectly.

If the Input Line System setting is 625 System then the Input Colour System is automatically set to PAL-N.

See also About the input colour system on page 115 for more information on this setting.

Component Video Interlace •

Select if your monitor/TV is not compatible with

Out

progressive-scan video.

 

 

 

 

Progressive

Select if your monitor/TV is progressive-scan

 

 

compatible. Check the operating instructions that

 

 

came with your monitor/TV if you’re not sure.

If your TV is incompatible with progressive scan video and you select Progressive, you will not be able to see any

picture at all. In this case, press OPEN/CLOSE while holding down the (Stop) button on the front panel to switch to Interlace (this also switches Screen Resolution on page 112 to the default setting).

When the HDMI signal is output, no video is output from the COMPONENT VIDEO OUT.

NTSC on PAL TV

On

NTSC discs will play correctly on PAL-only TVs.

 

 

 

 

Off •

Use if your TV is already NTSC-compatible.

Many recent PAL TVs are compatible with NTSC input and so this setting can be switched off. Check the operating instructions that came with your TV. See also About NTSC on PAL TV on page 115 for related information.

106

En

Page 106
Image 106
Pioneer DVR-650H-S manual Initial Setup menu