Playing and recording from a DV camcorder

Chapter 7

Playing and recording from a DV camcorder

07

You can play back and record video from a DV camcorder connected to the DV IN jack on the front panel of this recorder.

Important

If you connect a second recorder using a DV cable, you cannot control the second unit from this one.

You can’t control this unit remotely from a component connected to the DV IN jack.

Playing from a DV camcorder

1Make sure your DV camcorder is connected to the front panel DV IN jack.

2From the Initial Setup menu, check that the DV audio input is setup as you would like.

See DV Input on page 107 for more on this.

Check also that the Audio In settings for External Audio and Dual Mono Recording are as you want them (see Audio In on page 107).

HOME

MENU

3 Select ‘DV’, then ‘DV Video Playback’ from the Home Menu.

4Start playback on the camcorder. Images from the camcorder should appear on your TV.

To record the incoming video, Use the HDD and DVD button to select the HDD or a DVD for recording, then press

REC. Press STOP REC to finish recording.

If there is no signal from the device connected to the DV jack, or the signal is copy-protected, recording will pause. It will automatically restart once there is a recordable signal.

The recorder will only start recording from the DV IN jack if there is a valid signal. Recording will pause if the signal is interrupted during recording.

If your source is copy-protected using Copy Guard, you will not be able to record it. See Restrictions on video recording on page 35 for more details.

Recording from a DV camcorder

The source signal must be DVC-SD format.

You can’t record date and time information from DV cassette.

During DV recording, if a part of the tape is blank, or has copy-protected material on it, this recorder will pause recording. Recording will restart automatically when there is a recordable signal. However, if there is more than two minutes of blank tape, this recorder will stop recording and the camcorder should stop (depending on the camcorder).

Copying from a DV source

Using the recorder’s remote, you can control both the camcorder and this recorder.

Important

Some camcorders cannot be controlled using this recorder’s remote.

For best results when recording from a DV camcorder to this recorder, we recommend cueing the camcorder to the place you want to start recording from and setting the camcorder to play-pause.

63

En

Page 63
Image 63
Pioneer DVR-650H-S manual Playing and recording from a DV camcorder Chapter, Playing from a DV camcorder