Pioneer DVR-650H-S manual Connections Connecting using Hdmi, About Hdmi

Connections

Connecting using HDMI

If you have an HDMI or DVI-equipped1monitor or display2, you can connect it to this recorder using an HDMI cable (not supplied).

The HDMI connector outputs uncompressed digital video, as well as almost every kind of digital audio.

1Use an HDMI cable to connect the HDMI OUT connector on this recorder to an HDMI connector on an HDMI- compatible display.

To HDMI

input

								HDMI-compatible display
								HDMI
								OUT
ANTENNA				R	AUDIO	L	VIDEO
IN								DIGITAL
		INPUT 3					OUTPUT 2	AUDIO OUT
R	AUDIO	L	VIDEO	S-VIDEO			S-VIDEO
								AC IN
							CONTROL	HDMI OUT COAXIAL
							IN
OUT
	INPUT 1/AUTO START REC				Y	PB	PR
					COMPONENT VIDEO OUT OUTPUT 1

•The arrow on the cable connector body should be face down for correct alignment with the connector on the recorder.

When connected to an HDMI component or HDCP-compatible DVI component, the HDMI indicator lights.

HDMI setup is generally automatic. There are however settings you can change if you need to. See HDMI Output (only available when an HDMI device is connected) on

02

page 112 for more information. Note that the HDMI settings remain in effect until you change them, or connect a new HDMI component.

Important

•An HDMI connection can only be made with DVI-equipped components compatible with both DVI and High-bandwidth Digital Content Protection (HDCP). If you choose to connect to a DVI connector, you will need a DVI to HDMI adaptor cable. A DVI to HDCP connection, however, does not support audio. Consult your local audio dealer for more information.

•The HDMI connection is compatible with 32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 16 bit/ 20 bit/24 bit 2-channel linear PCM signals, as well as Dolby Digital, DTS and MPEG audio bitstream.

•If your connected component is only compatible with Linear PCM, the signal is output as Linear PCM (DTS audio is not output).

•If you have connected to a Pioneer plasma display, please select the HDMI setup on the display (refer to the supplied manual for more on this).

About HDMI

HDMI (High-Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD players and recorders, DTV, set-top boxes, and other AV devices. HDMI was developed to provide the technologies of High-bandwidth Digital Content Protection (HDCP) as well as Digital Visual Interface (DVI) in one specification. HDCP is used to protect digital content transmitted and received by DVI-compliant displays.

Note

1 Depending on the component you have connected, using a DVI connection may result in unreliable signal transfers.

2 The pixel resolution of this recorder’s HDMI video output is (according to TV format): NTSC (720 x 480i/p, 1280 x 720p, 1920 x 1080i/p) and PAL (720 x 576i/p, 1280 x 720p, 1920 x 1080i/p). If your display is not compatible with these resolutions the picture may not be correctly reproduced.

21

En