Pioneer DVR-650H-S manual Initial Setup menu Chapter, Using the Initial Setup menu

The Initial Setup menu 14

Chapter 14

The Initial Setup menu

Using the Initial Setup menu

The Initial Setup menu is where you can set various recorder options for sound, picture, language and so on.

Some settings can only be changed when the recorder is stopped. During playback and recording these settings are grayed out in the Initial Setup menu.

Except for the Setup Navigator, menu screens are exited automatically after 20 minutes of inactivity.

•Press HOME MENU and select ‘Initial Setup’.

In the table below, the default option is marked with a •.

Setting	Options	Explanation
Basic
Clock Setting	Auto	Set the channel that broadcasts a clock signal and
		the clock will be set automatically.
	Manual •	If there is no channel that broadcasts a clock signal
		in your area, you can set the time and date manually.
	Display	Set preferences for time and date display format.

The clock must be set in order to use timer recording.

Input Line System 525 System •		Use for NTSC or PAL-M recording.
	625 System	Use for standard PAL-N recording.

See also About the input line system on page 114 for more information on this setting.

HELP Setting	On •	Switches on the automatic Help screens for GUI
		displays.
	Off	Switches off the automatic Help screens for GUI
		displays. (Press HELP on the remote to manually
		display the Help screen.)
Setup Navigator	Start	Select to start the Setup Navigator. See also
		Switching on and setting up on page 30.
Tuner
Auto Channel	Antenna •	Select if you receive channels from an antenna. It
Setting		takes a few moments for the auto tuning to
		complete.
	Cable	Select if you receive channels via cable. It takes a few
		moments for the auto tuning to complete.

105

En