Colour RGB, YCbCr, Audio Output Auto, Hdmi Control

The Initial Setup menu		14

Setting	Options	Explanation

Colour	RGB (0–255)	Use if colours are weak and black appears to ‘ﬂoat’
		on the RGB (16–235)setting.

	RGB (16–235)	Use this setting if colours appear overly rich and the
		black too deep on the RGB (0–255)setting.

	YCbCr 4:2:2	The video signal is output as a 10-bit YCbCr 4:2:2
		component signal. This is the standard setting for
		HDMI-compatible devices.

	YCbCr 4:4:4	The video signal is output as a 8-bit YCbCr 4:4:4
		component signal.

•Depending on the connected device some settings may not be available.

•When a DVI device is connected, the YCbCr 4:2:2 and YCbCr 4:4:4 options are not available.

•You cannot choose YCbCr 4:2:2 when the Screen Resolution is set to 720 x 576i (720 x 480i).

Audio Output	Auto •	Dolby Digital, MPEG and DTS sources are output as
		a bitstream signal. However, depending on the
		Audio Out setting, number of audio channels, and
		the HDMI-connected device, Linear PCM audio may
		be output.

	PCM	All audio signals are converted to Linear PCM
		(except DTS).

Bitstream Priority Select if the connected device is compatible with bitstream audio.

This setting is not available when a DVI device is connected.

HDMI Control	On •	Enable the HDMI Control function. Select this option
		when connected to an HDMI Control-compatible
		Pioneer plasma display, AV system (amplifier or AV
		receiver etc.).

	Off	Disable the HDMI Control function. Select this option
		when not connected to an HDMI Control-compatible
		component, or when connected to a component
		manufactured by a company other than Pioneer.

•For more information about HDMI Control, see HDMI Control on page 22.

•This setting is available even if you are not connected to an HDMI device.

•For more information see Troubleshooting on page 123.

Options

On Screen Display	On •	The recorder displays operation displays (Stop, Play,
		etc.) on-screen.

	Off	Switches off the on-screen operation displays.

Front Panel Display	On •	The time is shown in the front panel display when the
		recorder is in standby.

	Off	The front panel display is switched off in standby.

113