Pioneer DVR-650H-S DVI device does not, Display any picture, Front panel, Hdmi indicator does

15Additional information

HDMI

Problem	Remedy
The connected HDMI or	•Try disconnecting then reconnecting the HDMI cable (while the
DVI device does not	power of both components is on).
display any picture	•Try switching the power of the HDMI/DVI device off then back on.
(and the front panel	•Try switching off the HDMI/DVI device and this recorder. Next, switch
HDMI indicator does	on the HDMI/DVI device and leave it for around 30 seconds, then
not light)	switch on this recorder.
	•When you connect an HDMI-compatible device make sure of the
	following:
	– The connected device’s video input is set correctly for this unit.
	– The cable you’re using is fully HDMI-compliant. Using a non-
	standard cable may result in no picture being output.
	– Don’t use several HDMI cables connected together. Use a single
	cable to connect devices together.
	•When you connect a DVI-compatible device make sure of the
	following:
	– The connected device’s video input is set correctly for this unit.
	– The DVI terminal on the connected device is HDCP-compatible.
	– The connected device is compatible with NTSC (720 x 480i/p,
	1280 x 720p, 1920 x 1080i/p) and PAL (720 x 576i/p, 1280 x 720p, 1920 x
	1080i/p) video input.
	•If the recorder’s internal HDD is damaged or broken, there will be no
	HDMI output.
	•Not all HDCP-compatible DVI devices will work with this recorder.
No video from the	•If you choose a setting that is incompatible with your TV you may not
HDMI output	be able to see any picture at all. In this case, press OPEN/CLOSE
	while holding down the (Stop) button on the front panel to switch
	the setting (this also switches Component Video Out on page 106 to
	the default setting).
There’s no sound from	•There is no sound when using a DVI terminal.
the connected HDMI or	•Some HDMI-compatible devices do not output sound (check with
DVI device	the manual that came with the connected device).
The power	•This unit’s power may be turned on each time you turn on the power
automatically turns on	for a connected plasma television. If you do not want this unit to be
	turned on in this way, set this unit’s HDMI Control to OFF (page 113).
Can’t record video	•When using HDMI Control to record, you must make sure that the
	channel information for the plasma television matches that of this
	unit. If the channel information does not match you cannot make
	recordings. Use the Auto Channel Setting function to set this unit’s
	channel information (page 105).

122

En