Timer Recording
IMPORTANT
You cannot transfer the PlusCode number while the VCR is recording or on recording pause mode.
If the VCR memory is full, Program memory is full will appear for 8 seconds, and then the Recap screen will appear. Use CANCEL to erase an entry before you can add another one.
If the code number you entered is wrong, The PlusCode number is not valid will display on the screen for 8 seconds, and then the VCR Plus+ system menu will appear.
If two programmed recording times overlap, VCR is already programmed for that time will display on the screen for 8 seconds. You will need to erase the previous program before you can enter the new one.
If the remote control has failed to transfer the data, The transfer has failed. Please transfer again will be displayed on the screen for 8 seconds. To transfer the same PlusCode number again, press TRANSFER twice. Pressing TRANSFER once displays the PlusCode number on the remote control LCD again, and pressing it again transfers the displayed PlusCode number.
7To program additional recording times, follow the procedure from step 2 to 6 again.
8When you are finished with all programming, check the following:
¥If you have a cable box, a digital cable box, a PRIMESTAR¨ or a DISH Networkª satellite receiver, leave the cable box or receiver turned ON.
¥If your VCR does not control your cable box, leave the box tuned to the station you wish to record.
¥Turn the VCR power OFF and make sure the programmed recording light is lit.
IMPORTANT
To cancel VCR Plus+ System Programming while programming with the remote control LCD, press VCR Plus+.
To cancel VCR Plus+ System Programming while displaying the Recap screen, press CANCEL to cancel the selected program, and then press MENU to exit the Program to record.
44
