Timer Recording
7If you wish to change the record speed, turn the SHUTTLE ring to the right repeatedly until the record speed is flashing. Change the recording speed by turning the ADJUST dial. Turn the SHUTTLE ring to the right.
8To program additional recording times, select an empty program line by turning the ADJUST dial. Turn the SHUTTLE ring to the right. You will return to the VCR Plus+ system menu. Continue the VCR Plus+ system programming procedure from step 3.
9When you are finished with all programming, check the following:
¥If you have a cable box, a digital cable box, a PRIMESTAR¨ or a DISH Networkª satellite receiver, leave the cable box or receiver turned ON.
¥If your VCR does not control your cable box, leave the box tuned to the station you wish to record.
¥Turn the VCR power OFF and make sure the programmed recording light is lit.
If you want to stop the programmed recording after it starts, press POWER on the front panel.
VCR Plus+ System Programming Using the Remote Control LCD
1Load a tape with its erasure prevention tab intact into the VCR.
2Press VCR Plus+ on the remote control. PlusCode No. appears on the remote control LCD.
3Use the number buttons on the remote control to enter the PlusCode number for the television show you want to record. For example, if the PlusCode number for the program you want to record is 5678, simply enter
If you enter a number incorrectly, press CANCEL or turn the SHUTTLE ring on the remote control to the left.
4Use DAILY/WEEKLY if you want to record your program daily or weekly. If you want to record a program one time, skip this step.
¥select DAILY if you want to record the same channel at the same time, Monday through Friday.
¥select WEEKLY if you want to record the same channel at the same time, on the same day each week.
5Press SP/EP under the flip cover of the remote control to select the recording mode; for example, SP. SP = standard play; EP = extended play.
¥select SP if you want to record in SP mode.
¥select EP if you want to record in EP mode.
¥do not make a selection if you want to keep the recording in the mode that was previously used.
6Press TRANSFER. The PlusCode number will be transferred to the VCR, and the Recap screen will appear. The program you have chosen to record will be highlighted.
Make sure that the programming contents shown on the screen is correct. The channel number will appear in blue color. If the displayed number is not correct, press INPUT to make the number flash, then turn the ADJUST dial to correct the channel number. Press ENTER to complete.
ÒSÓ will appear next to the channel number when you select a satellite channel.
IMPORTANT
If you cannot select the other program line by turning ADJUST dial on the remote, press PAUSE first, and then turn the ADJUST dial.
|
|
|
|
|
|
| ÂProgram to record |
|
| ||
| ÄChannel |
| 2 |
| |
| ÄDay | Monday 12 |
| ||
| ÄStart time |
| 11:30am | ||
| ÄStop time |
| 1:30pm | ||
|
|
|
| ||
| ÄRecord speed | SP | |||
| ¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹ | ||||
| Use ADJUST to select, |
|
| ||
| and ENTER. |
|
|
|
|
| Press MENU to go back. |
|
| ||
|
|
|
|
|
|
POWER
PlusCode No.
TRANSFER
PlusCode No.
DAILYTRANSFER
PlusCode No.
DAILY | TRANSFER |
| SP |
| |
PlusCode No. |
|
ÂProgram to record
CH DAY ON OFF
10 TH15 9:00p10:30pSP
¤2 MO12 11:30a 1:30pSP
---
---
¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹ Use ADJUST to select, and ENTER.
Press MENU to go back.
43
