Recording
Using One-Touch Recording (OTR)
1When you record a digital broadcast in
When you record a digital broadcast in
When you record an analog broadcast in
2Press REC/úREC LENGTH on the front panel twice. The first time you press the button, recording will begin. The second press of the same button adds 30 minutes to the OTR timer, displayed on the front panel. The OTR 2/úREC LENGTH on the remote control can also be used. When you first press this button, the VCR will begin recording and 30 minutes is added to the OTR timer.
3Press REC/úREC LENGTH or OTR 2/úREC LENGTH for each additional 30 minutes you want to add to the OTR timer, up to 4 hours. If you press REC/ úREC LENGTH 10 times or OTR 2/úREC LENGTH 9 times, you will see End on the front panel display. The VCR will record until the end of the tape. If you press REC/úREC LENGTH an eleventh time, the VCR will resume normal manual recording. If you press OTR 2/úREC LENGTH a tenth time, 0:00 will be displayed on the front panel display and the recording will stop.
The OTR timer will begin to count down backwards. When it reaches zero, the VCR will stop recording and turn off. The OTR light on the front panel display will light up during the OTR recording.
If you program too much time into the OTR timer
Continue pressing REC/úREC LENGTH or OTR 2/úREC LENGTH. After the End point you can start over from zero, adding time in 30 minute intervals.
How OTR affects other controls
If you press PAUSE during OTR, the VCR will pause recording, but the OTR timer continues to count down.
Press PAUSE again to resume recording from the
If you press STOP during OTR, you erase the OTR programming.
| 2 REC LENGTH | |
CHANNEL | SP/EP | |
INPUT | ||
|
JOG/CHANNEL
REC SP/EP
2 REC LENGTH
29
