Mitsubishi Electronics HS-HD2000U Advanced Options, Using the remote control to operate your TV

Models: HS-HD2000U

1 80
Download 80 pages 63.18 Kb
Page 66
Image 66

Advanced Features

Advanced Options

Using the remote control to operate your TV

The HS-HD2000U remote control can operate many of the frequently-used func- tions of your TV. You only need one remote to operate both your VCR and TV.

The HS-HD2000U remote control is pre-set to operate Mitsubishi televisions, but it can also operate TVs from other manufacturers. To set your remote control for your particular brand of television, follow these instructions.

setting up your remote control to operate your TV

1Turn off your TV.

2On the HS-HD2000U remote control, set the VCR/TV slide switch to the TV position.

3While holding in INPUT, press the code listed that corresponds to the brand of your TV.

4Press TV POWER on the HS-HD2000U remote control. Once your TV has turned on, your remote is set up to operate your brand of TV.

If your TV does not turn on, repeat step 3 using the next code listed for the brand of your TV.

If none of the codes listed for the brand of your TV work, then repeat step 3 several times, using a different code button until one works. The possible code buttons are: 0, 1-9, MUTE, VOLUME »,¼, CHANNEL»,¼ and ENTER.

You do not need to perform this set-up again until you change the batteries, set up your remote for another brand of television, or you get a new TV.

Once you have correctly set your remote control to operate your TV, you will be able to use the TV POWER, CHANNEL, VOLUME, and number buttons to operate your TV.

IMPORTANT

Because of variations among models, some or all codes may not work, or they may operate different functions than expected for your particular TV. If this occurs, you may need to use your TV remote control.

Sometimes manufacturers will change the remote control codes for their products, or they will use more than one code. If this is the case, your remote may not be able to control your TV.

When you replace the batteries in your remote, the remote may return to its initial setting (code button 1). Repeat the steps above to reset your remote control. If you enter a new code, the previous code will be erased.

operating your TV with the HS-HD2000U remote control

1Set the VCR/TV slide switch to TV position on the HS-HD2000U remote control to tell the remote that you want to operate the TV.

2Point the remote control towards the TV and press the desired buttons. To once again control the VCR, set the VCR/TV slide switch to VCR position.

Brand of TV

Brand code

 

buttons

Mitsubishi

1, 2, 3

Magnavox

4

Sharp

3, 5

Panasonic

CHANNEL»,¼

Toshiba

7

Hitachi

8

Sanyo

0

RCA

VOLUME »

NEC

9

Goldstar

9

Zenith

ENTER

Sony

VOLUME¼

JVC

MUTE

Pioneer

6

VCR

TV

64

Page 66
Image 66
Mitsubishi Electronics HS-HD2000U manual Advanced Options, Using the remote control to operate your TV