54
Editing Features
R
VIDEO S-VIDEO
OUT 2
AUDIORL
L
RL
RECORDING
AUDIO OUT L
AUDIO OUT R AUDIO IN R
AUDIO IN L
VIDEO IN
S-VIDEO IN
VIDEO OUT
S-VIDEO OUT
HS-HD2000U PLAYBACK
Use either a video cable or an S-video cable.
Do not use both.

Using the HS-HD2000U to Playback to Another VCR

1Connect one stereo audio cable to AUDIO IN L and
R on the recording VCR, and to AUDIO OUT L and
R on the HS-HD2000U. If the other VCR is mono,
you need a Y-adapter to record both audio channels.
2If the recording VCR is S-VHS, connect an S-video
cable to S-VIDEO IN on the recording VCR and to
S-VIDEO OUT on the HS-HD2000U.
If the recording VCR is standard VHS, connect a
yellow video cable to VIDEO IN on the recording
VCR and to VIDEO OUT on the HS-HD2000U.
3Set the audio monitor on the HS-HD2000U to
Stereo.
You should set the PerfecTape Select in the video
function to Normal to improve the quality of your
copy. See Selecting and adjusting the audio and
video functions on page 36.
4Set the input of the recording VCR to External.
5Put a blank tape into the recording VCR. If the
recording VCR is an S-VHS VCR, be sure to use an
S-VHS tape.
6Put the tape you want to copy into the HS-HD2000U
and find the cue point.
7On the recording VCR, press REC, then PAUSE.
8On the HS-HD2000U, press PLAY, then PAUSE.
9Press the PAUSE buttons on both VCRs at the
same time to begin copying the tape.
10 Press STOP on both VCRs when you are finished.