Timer Recording
VCR Plus+¨ System Programming
The VCR Plus+ system allows you to program your VCR to record by simply entering a PlusCode programming number. You can find this number in TV Guide or possibly your local TV listings. There are 2 ways of using VCR Plus+ System Programming on the
VCR Plus+ System Programming Using the On Screen Display
1Load a tape with its erasure prevention tab intact into the VCR.
2Press MENU. VCR Main Menu appears on your screen. Turn the ADJUST dial to select Program to record. Turn the SHUTTLE ring to the right.
IMPORTANT
If the VCR memory is full, Program memory is full will appear for 3 seconds, and then the Recap screen will appear. Use CANCEL to erase an entry before you can add another one.
If there is at least one programmed recording already entered, the Recap screen will appear. Wait 4 seconds, and the VCR Plus+ system menu will appear.
3VCR Plus+ system menu will appear. Use the number buttons on the remote control to enter the PlusCode number for the television show you want to record. For example, if the PlusCode number for the program you want to record is 5678, simply enter
4If you enter a number incorrectly, turn the SHUTTLE ring to the left or press CANCEL on the remote control. When you have finished entering the PlusCode number, turn the SHUTTLE ring to the right.
IMPORTANT
If the code number you entered is wrong, The PlusCode number is not valid will display on the screen for 3 seconds, and then the VCR Plus+ system menu will reappear.
5Use the ADJUST dial to select whether you want to record your program once, daily, or weekly.
¥Once will record a program one time.
¥Daily will record the same channel at the same time, Monday through Friday.
¥Weekly will record the same channel at the same time, on the same day each week.
After you have made your choice, turn the SHUTTLE ring to the right.
IMPORTANT
If two programmed recording times overlap, VCR is already programmed for that time will display on the screen. You will need to erase the previous program before you can enter the new one.
6Recap screen will appear. The program you have chosen to record will be highlighted.
The channel number will appear in blue color. Make sure that the correct channel number is shown on the screen. If the displayed number is not correct, press INPUT to make the number flash, then turn the ADJUST dial to correct the channel number. Press the ENTER to complete. ÒSÓ will appear next to the channel number when you select a satellite channel.
»VCR Main Menu ÂProgram to record Ä1394 connection list ÃCustomize choices
Use ADJUST to select, and ENTER.
Press MENU to exit menus
ÂVCR Plus+ system
Use number keys to enter the PlusCode number
Press ENTER when done. Press CANCEL to erase the PlusCode number. Press MENU to go back.
ÂVCR Plus+ system | |
PlusCode number:5678 | |
| ÄOnce |
| ÄDaily |
| ÄWeekly |
Use ADJUST to select, | |
and ENTER. | |
Press MENU to go back. | |
|
|
Recap screen
ÂProgram to record
CH DAY | ON | OFF |
¤2 MO12 11:30a 1:30pSP
---
---
---
¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹ Press INPUT to correct channel setting.
Press MENU to go back.
42
