Mitsubishi Electronics HS-HD2000U manual Selecting a Channel, Digital cable box

Setting Up Your VCR

Selecting a Channel

Now that you have memorized channels, and added or deleted some, you will want to be able to select channels. If you have not yet memorized channels using ALLSET, see page 16. (If you selected digital cable box, you cannot select any satellite channels.)

Antenna/Cable selections indoor/outdoor antenna cable antenna without box cable box only

digital cable box

Satellite Receiver selections Mitsubish, Sony, RCA, GE, Toshiba, Panasonic, Hughes, DISH Networkª

Satellite Receiver selections

PRIMESTAR¨

Your VCR can receive VHF/UHF channels 2Ð69 cable channels 1Ð125 cable box channels 0Ð99 digital cable box channels 0Ð999

Your VCR can receive

any channel from 100-999 provided by your satellite service

(cable channels 100-125 cannot be selected)

Your VCR can receive

any channel from 1-999 provided by your satellite service

(cable channels 100-125 cannot be selected)

If you try to select a channel number that the VCR cannot receive, the VCR will not change channels.

selecting antenna, cable or digital cable channels sequentially

Press CHANNEL on the remote control or turn the jog dial on the VCR front panel. This will cycle through the channels in sequential numerical order.

When you select digital cable channels from 100 to 999, holding down the CHAN- NEL on the remote or turning the jog dial on the front panel quickly will advance the channels in 10 channel increments.

selecting antenna, cable or digital cable channels directly

Use the number buttons on the remote control. For example, to choose channel 23, press 2-3. If you select digital cable channels, you can select the three digits channels directly by using the number buttons. For example, to choose digital cable channel 157, press the 1-5-7.

To select a single digit channel, such as channel 5; press 0-5. You can also press 5, then press ENTER.

selecting satellite channels sequentially

Press CHANNEL on the remote or turn the jog dial on the VCR front panel. When pressing the up arrow or turning the jog dial to the right, the lowest satellite channel will follow the highest antenna or cable channel. When pressing the down arrow or turning the jog dial to the left, the highest satellite channel will follow the lowest antenna or cable channel. The other satellite channels will follow in numerical order. Continuously holding down CHANNEL on the remote or turning the jog dial on the front panel quickly will advance the channels in 10 channel increments.

selecting satellite channels directly

For Mitsubishi, Sony, RCA, GE, Toshiba, Panasonic, Hughes and DISH Network; press the number buttons on the remote. For example, to go to channel 263, press 2-6-3.

For PRIMESTAR channels, press INPUT until the channel number with the PRIMESTAR light ( ) appears on the front panel display. Then press the num- ber buttons on the remote.

For one or two digit channel numbers, press the number buttons, then turn the SHUTTLE ring to the right. For example, to go to channel 29, press 2-9-ENTER.

22