Setting Up Your VCR
7When the brand code is correct, turn the shuttle ring to the right. The screen will add a Channel selection.
8Use the ADJUST dial to select the channel on which your cable box or digital cable box sends a signal to the VCR (normally channel 3 or 4). If you connected your cable box or digital cable box with audio/video cables, use INPUT to select L1 (if you used the rear panel jacks), or L2 (if you used the front panel jacks). You cannot use both digital cable box and satellite receiver. Thus if you selected Digital cable box only in step 4, you cannot select L2.
9After entering the channel number, turn the SHUTTLE ring to the right. The VCR will begin memorizing the available channels. During this process your TV screen, the front panel display, and your cable box or digital cable box should all display each channel number one by one.
10When the VCR is finished memorizing, you will see the screen for entering your zip code. Use the number keys to enter your zip code. For example, if your zip code is 92618, press
If you enter a number incorrectly, turn the SHUTTLE ring to the left or press
CANCEL.
When you have finished entering the zip code, turn the SHUTTLE ring to the right.
The VCR will begin to search for a channel that carries a time signal to set the clock. If the VCR can find the channel, it will set the clock. You can see if the clock has been set on the front panel display of your VCR.
The clock setting set up time varies, it may take up to 30 minutes as the VCR searches one by one for a channel that carries a time signal.
If the VCR will not set the clock (the current time display still shows Ð Ð:Ð Ð), see Setting the Clock on page 23.
11Once the VCR has set the clock, it shows the message indicating that the first step is completed. Then, press POWER to turn off the VCR and leave the VCR off for the night. The full
During this time, the VCR will search for a channel that carries data to set the VCR Plus+ guide channel numbers for your area and then check the guide channel number against the channel number you receive in your home and select the correct lineup automatically.
IMPORTANT
If you use a cable box or digital cable box, you will need to leave your cable box or digital cable box ON at all times.
|
|
|
|
|
|
| ÆAllSet |
|
|
| |
| Your cable box sends a |
|
| ||
| signal on which channel? | ||||
| ÄBrand code | 1 |
|
| |
| ÄChannel |
| 3 |
|
|
|
|
|
|
| |
| ¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹¹ | ||||
| Use ADJUST to select, |
|
| ||
| and ENTER. |
|
|
| |
| Press MENU to go back. |
|
| ||
|
|
|
|
|
|
ÆAllSet
Now memorizing all the stations you can receive
Channel 3 Stand by this may take a few minutes
To cancel memorization, press CANCEL
ÆAllSet
Use number keys to enter ZipCode
92618
Press ENTER when done. Press CANCEL to erase the ZipCode.
Press MENU to go back.
ÆAllSet
1st Step in Progress...
Please Wait.
Press MENU to go back.
ÆAllSet
1st Step successful.
Please leave
your VCR Off Overnight
AllSet will be
completed Overnight
Press MENU to go back.
18
