Timer Recording
Quick Program
Quick Program is an exclusive Mitsubishi feature that simplifies the process of programming your VCR to record. When you press QUICK PROGRAM on the remote control, you will immediately see the VCR Plus+ system menu and can begin programming right away.
You can use this feature even when the VCR is stopped, playing, fast forwarding, rewinding, or off. (Quick program does not work while using OTR2.)
1Press QUICK PROGRAM on the remote control. If the VCR is off, it will turn on. After tuning your TV to the correct channel or input, VCR Plus+ system menu will appear.
IMPORTANT
If the VCR memory is full, Program memory is full will appear for 3 seconds, and then the Recap screen will appear. Use CANCEL to erase an entry before you can add another one.
2Complete steps 3 through 10 in Conventional VCR timer recording. (See page 40.)
When you have finished, press QUICK PROGRAM again.
If the VCR is stopped, it will turn off and be ready to record your program at a later time.
If the VCR is playing, recording, fast forwarding or rewinding, the menus will turn off, but the VCR power will remain on.
3When you are finished with entering the programs you wish to record, check the following:
¥If you have a cable box, a digital cable box, a PRIMESTAR¨ or a DISH Networkª satellite receiver, leave the cable box or receiver turned ON.
¥If your VCR does not control your cable box, leave the box tuned to the station you wish to record.
¥Make sure the VCR is turned OFF and the programmed recording light is lit before the recording time.
IMPORTANT
If you press QUICK PROGRAM, but the clock is not set, Set the clock menu will appear. Set the clock manually.
QUICK PROGRAM
ÂVCR Plus+ system
Use number keys to enter the PlusCode number
or press ENTER to program.
Press MENU to go back.
Recap screen
ÂProgram to record
CH DAY | ON | OFF |
¤2WE14 11:30a 1:30pSP
10TH15 9:00p10:00pEP
46SU18 7:00a 9:00aSP
45
