Recording

Selecting and Adjusting the Audio and Video Functions

1If you set your remote control to be able to operate Mitsubishi televisions by code button 1, make sure that the VCR/TV slide switch is set to VCR position. See Using the Remote Control to Operate your TV on page 64.

2Press VIDEO repeatedly until the function you want to adjust appears.

audio and video function menu

￿

￿

￿

￿

￿

VCR￿

Listen to: Stereo￿

Use ADJUST to select

3Turn the ADJUST dial on the remote to adjust the setting. The functions will disappear if you do not press any buttons for 5 seconds.

When you set your remote control to be able to operate Mitsubishi televisions by code button 1:

The TV audio function will appear when you press TV AUDIO on the HS-HD2000U remote.

The TV video function will appear when you press VIDEO on the HS-HD2000U remote with the VCR/TV slide switch is set to TV position.

setting 3D-Y/C or DNR + TBC by using DNR&TBC on the front panel

1When you want to set 3D-Y/C, press DNR&TBC on the front panel during the tape is stopped.

When you want to set DNR + TBC, press DNR&TBC on the front panel during the tape is playing.

When 3D-Y/C or DNR + TBC is in operation, DNR&TBC button will be lit. If not, the button will be turned off.

IMPORTANT

The audio and video function menus do not appear:

¥when the VCR menu is displayed

¥during special effects playback

Tape, D-VHS Tape and 3D-Y/Cfunction does not appear during playback.

Play PerfecTape and DNR + TBC is displayed only during playback.

PerfecTape displays only when a tape, with its erasure tab intact, is loaded and the VCR is stopped.

TV AUDIO

VIDEO

2 ADJUST

DNR&TBC

36

Page 38
Image 38
Mitsubishi Electronics HS-HD2000U manual Selecting and Adjusting the Audio and Video Functions