Editing Features
Copying a Tape from Analog to Analog
There are two basic ways to make a copy of a tape from analog to analog.
One way is to use the
The other way is to use another VCR to record and use the
Regardless of which method you may choose, you will need one RCA audio cable and one
Using the HS-HD2000U to Record from Another VCR
1Connect the audio cable to AUDIO OUT L and R on the playback VCR and to AUDIO IN L and R on the
2If the playback VCR is
If the playback VCR is standard VHS, connect a video cable to VIDEO OUT on the playback VCR and to the VIDEO IN on the
3If the playback VCR is
4Use INPUT to set the
5Put a blank tape into the
Make sure that the
Make sure that the Front
6Put the tape you want to copy into the playback VCR and find the cue point. Press STOP if the picture starts playing.
7On the
8On the playback VCR, press PLAY, then PAUSE.
9Press the PAUSE buttons on both VCRs at the same time to begin copying the tape.
10When finished, press STOP on both VCRs.
| PLAYBACK |
S VIDEO IN 2
VIDEO IN 2
L R
VIDEO IN
AUDIO IN R | AUDIO OUT R |
AUDIO IN L | AUDIO OUT L |
R L
VIDEO OUT
Use either a video cable or an
53
