Mitsubishi Electronics HS-HD2000U manual Playback, Connection list, TV with Audio/Video Inputs

Playback

Setting Up Your VCR to Playback/Recording the Digital Broadcast in D-VHS Format

1Make sure that your VCR and the integrated HDTV or the IEEE 1394-equipped HDTV receiver is connected with an IEEE 1394 cable.

2Turn on the IEEE 1394-equipped HDTV receiver.

3Turn on your TV and switch the input of the TV to the correct input of the IEEE 1394-equipped HDTV receiver.

4Press POWER on the VCR to turn the power on.

To go back to viewing the picture from the TV, set your TV input to the previous ANTENNA input position.

If you do not switch the integrated HDTV or the IEEE 1394-equipped HDTV re- ceiver to the correct external input, the screen to the right will be displayed on the screen when you try to watch a digital broadcast.

1394 connection list

When you connect an integrated HDTV, an IEEE 1394-equipped HDTV receiver or a D-VHS VCR to the HS-HD2000U, you can see the list of connected TV, receiver or VCR on the 1394 connection list menu (up to 5 devices). The integrated HDTV and the IEEE 1394-equipped HDTV receiver will display as TUNER and the D-VHS VCR will be shown as VCR. For the device which was connected to the HS- HD2000U before but now it is not connected, lost connection will be displayed. The device which was first connected to the HS-HD2000U will be shown as d1, and connected fifth will be shown as d5. When you want to remake the list, press CANCEL on the VCR remote control. In this case, the order of the devices on the list will be changed.

IMPORTANT

When you connect Mitsubishi integrated HDTVs WS-55859, WS-65869, WS- 55909, WS-65909 or WS-73909, they will not appear in 1394 connection list menu. When you use these TVs, they will control the HS-HD2000U. So to use the function of the HS-HD2000U, use the TV to operate the VCR.

displaying 1394 connection list

1Press MENU on the remote control. VCR Main Menu comes up.

2Turn the ADJUST dial on the remote control to select 1394 connection list. Turn the shuttle ring to the right. 1394 connection list menu appears.

Setting Up Your VCR to Playback/Recording the Tape in Analog (S-VHS/S-VHS ET/VHS) Format

The first thing you need to do is set up your VCR so that you can see the picture coming from the VCR. ItÕs important to take a few minutes to set up your VCR correctly before you try to use it. Based on the type of TV that you have, choose one of the following:

TV with Audio/Video Inputs

1Turn on your TV and switch it to the correct external input. For most Mitsubishi TVs, this means pressing the TVÕs INPUT button until you see the words Ext-1or Input-1on the screen. If you do not have a Mitsubishi TV, please refer to your TV OwnerÕs Guide for this procedure.

2Turn the VCR on by pressing POWER.

12

VCR POWER

IEEE 1394

INPUT

￿

This is a digital￿ recording.￿

You￿ cannot view it￿ through this input.￿

￿

￿

Please select IEEE1394￿ connection.

Ä1394 connection list￿ d1 TUNER lost connection￿ d2 TUNER lost connection￿ d3 TUNER now connecting￿ d4 VCR now connecting￿

￿

Press CANCEL to renumber￿ Use ADJUST to select,￿ and ENTER.￿

Press MENU to go back.

PWR. HS STD VCR

H M S