Lenovo L330 manual Date/Time menu, Security menu, Serial ATA Sata, Select Compatibility mode

Table 4. Config menu items (continued)

Menu item	Submenu item	Selection		Comments
Beep and Alarm	Password Beep	•	Disabled	With this option enabled,
		•	Enabled	you will hear a beep sound
				when you are prompt to
				enter a power-on, hard disk,
				or supervisor password.
				The beep sounds will be
				different when you have
				entered the correct and
				incorrect passwords.
	Keyboard Beep	•	Disabled	Enables or disables
		•	Enabled	keyboard beep when
				unmanageable key
				combinations are pressed.
Serial ATA (SATA)	SATA Controller Mode	•	Compatibility	Selects SATA controller
	Option	•	AHCI	operation mode. If you
				select Compatibility mode,
				SATA controller operates in
				compatibility mode.
CPU	Core Multi-Processing	•	Disabled	Enable or disable additional
		•	Enabled	execution core units within
				a CPU.
				Note: If you are using a
				computer with a single-core
				processor, this item does
				not appear.
	Intel Hyper-Threading	•	Disabled	Enable or disable additional
	Technology	•	Enabled	logical processors within a
				processor core.
				Note: This sub-menu is not
				supported in models with
				an AMD CPU.

Date/Time menu

If you need to set the current date and time of your computer, select Date/Time from the ThinkPad Setup program main menu. The following submenu is displayed:

•System Date

•System Time

To change the date and time, do the following:

1.Using the up and down arrow keys, select the item to change the date or time.

2.Press Tab, Shift+Tab, or Enter to select a field.

3.Type the date or time.

4.Press Fn+F10 to save the changes and restart the system.

Security menu

If you need to set the security features of your computer, select Security from the ThinkPad Setup program main menu.

Chapter 7. Advanced configuration 91