Installing the oven
,The appliance must not be operated until it has been correctly installed in its housing unit. Otherwise it poses an electric shock hazard.
To ensure adequate ventilation to the oven once installed:
–do not fit a rear panel into the housing unit.
–make sure that the shelf on which the appliance is placed does not touch the wall.
–do not fit insulation material inside the housing unit.
When installing the appliance do not lift it up by the door handle as this can damage the door.
Turn off the mains electricity supply to the isolator.
Remove the carry handles at the sides.
^Using the screws supplied, fix the brackets supplied to the right and left side of the housing unit.
^Connect the mains cable from the oven to the isolator.
^Push the appliance into the oven housing unit and align it.
80
