Moisture plus
Evaporate residual moisture
If there is still water in the steam injection system at the end of a programme or if the programme is cancelled, you will be prompted to evaporate the residual moisture.
If you confirm the prompt immediately with OK, the oven will heat up to approx. 150 °C and the residual water will evaporate.
How long this takes will depend on the amount of water in the system.
If you select "Cancel", the evaporation of the residual water will not start imme- diately.
However, you will then only be able to run functions and Automatic programmes without Moisture plus.
The evaporation of the residual water process must be carried out before you can use an Automatic programme with Moisture plus or the Moisture plus function.
Descaling
The oven will need to be descaled depending on the number of cooking programmes using Moisture plus which have been run and the amount of water taken into the oven for these.
The frequency of descaling also depends on the water hardness level in your area.
A message to tell you to descale the appliance will appear in the display.
You can start the descaling process at any time by selecting "Descale" in the main menu.
If you do not carry out the descaling process when the prompt to descale the oven appears, you will only be able to run functions and Automatic programmes without Moisture plus.
See "Cleaning and care" for more information about descaling.
44
