Before using for the first time
To enter the basic settings
The oven will switch on automatically when it is connected to the electricity supply.
Welcome screen
A welcome screen will appear in the display, and you will then be requested to select some basic settings which are needed before the appliance can be used.
Follow the instructions in the display.
Setting the language
The welcome screen will be replaced by the request to set a language:
^Keep pressing the sensor to the right of the arrows until the language required appears in the display.
^Touch the sensor to the left of the language you want.
A tick L will appear beside the language you have selected.
^Confirm by touching the sensor next to "OK".
Clock format
The request to select a Clock format will appear. The default setting for the clock is 24 h.
^Touch the sensor to the left of the clock format required.
A tick L will appear beside the clock format you have selected.
^Confirm with OK.
Setting the time of day
You will then be asked to enter the time of day. The hour is highlighted.
^Use the sensor next to + to enter the hour, confirm with "OK" and then enter the minutes in the same way.
Time display
You will then be asked when you want the time of day to show in the display:
ßOn
The time is always visible in the display.
ßOn for 60 seconds
The time is only ever visible for 60 seconds.
ßDo not display
The time only shows in the display when the oven is being operated.
^Touch the sensor to the left of the setting you want.
After you have confirmed your selection with "OK", the display will show messages to tell you that:
–your appliance is equipped for the Mielehome system.
–your appliance has been success- fully set up to use it for the first time.
As soon as you confirm this last message with "OK", your appliance is ready for use.
If you have selected the wrong language by mistake proceed as described in "Settings - Language" to get back to the correct language.
25
