|
| Problem solving guide |
|
| |
|
|
|
Problem | Possible cause and remedy | |
Browning is uneven. | There will always be a slight unevenness. If browning is | |
| very uneven, check | |
| with Fan plus U: | |
| – | whether the temperature was set too high, |
| – | whether the correct shelf level was used. |
| with Conventional heat V: | |
| – | the colour and material of the baking tins being used. |
|
| Light coloured, shiny, or thin walled tins are less suitable. |
| – | whether the correct shelf level was used. |
A fault code | You can rectify the following fault codes yourself: | |
appears in the | – | F 23: The pyrolytic temperature of approx. 460 °C was |
display (F + |
| not reached. |
numbers), and a |
| This could have been caused by too much soiling in the |
polyphonic tune |
| oven to start with. |
plays. |
| Remove all coarse soiling before starting the pyrolytic |
|
| cleaning programme again. |
|
| If the fault code appears again please contact the Miele |
|
| Service Department. |
| – | F 32: The door has not locked. |
|
| Interrupt the pyrolytic cleaning programme by switching |
|
| the oven off. Then start the pyrolytic programme again. |
|
| If the fault code appears again call the Miele Service |
|
| Department. |
| – | F 33: The door lock for the pyrolytic cleaning programme |
|
| will not open. |
|
| Interrupt the pyrolytic cleaning programme by switching |
|
| the oven off. If the door lock will still not open please |
|
| contact the Miele Service Department. |
71
