Miele H 5981 BP installation instructions Cleaning and care

	Cleaning and care
Descaling
	A plastic tube (with clip) is supplied
Only use the descaling tablets	with your oven so that you do not
supplied with the appliance. These	have to hold the container with the
have been specially formulated and	descaling agent underneath the
are available from the Miele Spare	water intake tube.
Parts Department or via the internet
on www.miele-shop.com.
Other types of descaling agents will
damage the oven.
Follow the instructions on the
package carefully to avoid
damaging the oven.
Clean the oven interior after
descaling to ensure that all traces of	^ Attach the plastic tube to the end of
descaling agent have been	the water intake tube. Place the other
removed.	end in the bottom of the descaling
	solution container, and secure the
The descaling process takes about	plastic tube to the container with the
90 minutes. Follow the instructions in	clip.
the display.	^ Close the door.
^ Dissolve one descaling tablet in
	^ Start the suction process with the
approx. 600 ml of cold mains tap
	sensor next to "OK".
water.
^ Place the universal tray on the top	The progress of the descaling process
shelf level to collect the descaling	will be indicated by illuminated
	segments in the bar in the display. You
solution after it has been used.
	can hear the pump.
^ Select the "Descale" option.
	The amount of solution specified can
	be more than the amount which is
	actually taken in, which means that
	some of the solution will be left in the
	container at the end of descaling. Top
	the container up with approx. 300 ml of
	water, as the system will need to draw
	in some more liquid during the
	activation phase.

67