Chapter 7
Printhead
The printhead dispenses the ink from the ink cartridges onto the paper. Printer maintenance involves:
Calibration
Clean the printhead
Calibration
The Kodak EasyShare AiO performs a calibration every time you install or replace a printhead. However, you can run a calibration if you are seeing changes in the image quality. Calibration aligns the printheads and performs a nozzle health check to enable
To calibrate from computer
1Load the main tray or photo tray with photo paper.
IMPORTANT: If you don't have any photo paper, you can use plain paper, but photo paper is highly recommended for calibrations.
2Start the AiO Home Center.
3Click to open the Help panel.
4Under General Links, click Maintenance.
5Click Calibration to make a calibration print.
6Follow the instructions on the calibration print to calibrate the printer.
To calibrate from control panel
1Load the main tray or photo tray with photo paper.
IMPORTANT: If you don't have any photo paper, you can use plain paper, but photo paper is highly recommended for calibrations.
2Press Menu.
3Press b until Calibrate Printer is selected.
4Press OK. A new screen appears with Print Calibration Page selected.
5Press Start and follow the instructions on the LCD screen to complete the calibration.
Clean Printhead
If you notice a degradation in the quality of prints, the printhead may need cleaning.
To clean printhead from computer
1Start the AiO Home Center.
2Click to open the Help panel.
3Under General Links, click Maintenance.
4Click Printhead Cleaning.
74 | Kodak EasyShare 5300 AiO |