Kodak 5300 manual On/Off Light, Light Status, Cause, Action/Solution

		Product Overview
	On/Off Light
Light Status	Cause	Action/Solution
Light is off.	The printer is turned off.	Press the On/Off button to turn
		the printer on.
	The Printer does not have power	Check the light on the power
	applied.	cord.
	The printer needs attention.	Check to see if the Photo Tray
		light is on. If the Photo Tray light
		is on for more that 20 seconds
		and the On/Off light does not
		come on, disconnect the power
		for 5 seconds and reconnect the
		power. If the Photo Tray light
		does not go out after 20 seconds
		and the On/Off light comes on,
		contact Kodak for assistance.
Light is a steady green.	The printer is properly powered	None
	up, on, and ready.
Light is a flashing green.	The printer is busy.	None: Normal operation when
		performing a print, copy, scan, or
		other job requests.
	The printer is initializing.	None: Please wait and allow the
		printer to complete the
		initialization process (about 30
		seconds). If the flashing green
		persists, you may have an issue
		with the printer. Visit Kodak.com
		for additional troubleshooting
		steps or contact your local
		Kodak Call Center.
Light is a flashing yellow.	The printer has detected an error	Disconnect power for 5 seconds
	condition.	and reconnect power. If the
		condition persists, please check
		the LCD display for additional
		information. Contact Kodak
		service for assistance.
		Also check the status monitor on
		your computer for a message.
Light is a flashing red.	The printer has detected an error	Check the LCD display or status
	condition that needs your	monitor on your computer for a
	attention.	message.
Flashing a rotating pattern of	The printer has not detected that	Please install a Printhead and
red, yellow, and green.	a Printhead is installed.	ink cartridges.

User’s Guide 5