7 Maintenance
The Kodak EasyShare
Fingerprints and other debris on the glass or lid backing could slow down performance and affect the accuracy of scanning.
This section covers the Settings menu, printhead installation, printhead calibration, checking ink levels, and changing ink cartridges.
General Care
IMPORTANT: Always disconnect the power before cleaning. Do not use harsh or abrasive cleaners or organic solvents on the EasyShare AiO or any of its parts.
WARNING:
Do not leave items on the scanner glass. The heat of the scanning lamp may cause them to stick.
To clean, wipe the outside of the EasyShare AiO and LCD with a clean, dry cloth.
Keep the surrounding area vacuumed and
Protect the EasyShare AiO from tobacco smoke, dust, sand, and liquid spills.
Avoid placing objects on the EasyShare AiO.
Keep the EasyShare AiO, accessories, and supplies away from direct sunlight and out of high- temperature environments.
Do not allow chemicals, such as suntan lotion, to come into contact with the painted surface of the EasyShare AiO.
If the EasyShare AiO has been subjected to inclement weather or you suspect water has gotten inside the EasyShare AiO, turn it off and let it dry out. If this does not resolve the problem, contact customer support (see Telephone Customer Support).
Service agreements are available in some countries. Contact a dealer of Kodak products for more information.
The EasyShare AiO and the AC power adapter contain a small amount of lead in the circuit board. Disposal of this material may be regulated due to environmental considerations.
For more disposal or recycling information, contact your local authorities. In the US, visit the Electronics Industry Alliance Web site at www.eiae.org.
Clean the Scanner Glass
To ensure that your copies and scans remain clear, keep the scanner glass and lid backing clean and dust the exterior.
1Turn off the EasyShare AiO and raise the lid.
2Clean the glass with a soft cloth or sponge slightly moistened with a nonabrasive glass cleaner.
User’s Guide | 69 |
