Kodak 5300 manual Install the Duplexer

Models: 5300

1 112
Download 112 pages 11.16 Kb
Page 18
Image 18
Install the Duplexer

Chapter 2

4Press down on the ink cartridge until you hear it snap into position.

5Tear open the color ink cartridge bag at the notch and remove the ink cartridge.

6Remove and discard the orange cap.

7Insert the color ink cartridge into the printhead.

8Press down firmly on the cartridge until you hear it snap into position.

9Close the printer access door.

NOTE: For the best quality prints, store ink cartridges in a location where the temperature does not exceed 85° F (30° C).

Install the Duplexer

The Kodak EasyShare AiO supports an optional duplexer (Kodak EasyShare 5000 Series Two-Sided Printing Accessory) that enables printing on both sides of the paper. When installed, the duplexer is automatically detected by the printer and computer system software.

The duplexer is limited to plain paper. The paper dimensions that can be used are from 6.9 to 8.5 inches (17.5 to 21.6 cm) wide and from 9.8 to 11.7 inches (24.9 to 29.7 cm) long.

You can purchase a duplexer and other accessories for your printer at www.kodak.com/go/accessories.

14

Kodak EasyShare 5300 AiO

Page 18
Image 18
Kodak 5300 manual Install the Duplexer