Kodak 5300 manual Scene Balance, Add Date to Prints, Button Sounds, Minutes to Standby

Getting Started

4Press b to select Use Print Order if Found.

5Press _ or ` to change the setting.

6Press OK.

Scene Balance

Your EasyShare AiO is configurable to apply automatic scene balance improvements (brightness) for photos printed on the AiO from camera cards and USB connected devices.. The default is to apply the scene balance improvements.

1Press Menu to display the main menu.

2Press b to select Photo Print Settings.

3Press OK.

4Press b until Scene Balance is selected.

5Press _ or ` to enable or disable Scene Balance.

6Press OK.

Add Date to Prints

You can set your EasyShare AiO to print the date a picture was taken on the photo print. The default is to not print the date.

1Press Menu to display the main menu.

2Press b to select Photo Print Settings.

3Press OK.

4Press b until Add Date to Prints is selected.

5Press _ or ` to enable or disable date printing.

6Press OK.

Button Sounds

You can configure your EasyShare AiO to emit an audio feedback beep when you press a button on the Control Panel. The default setting is to beep.

1Press Menu to display the main menu.

2Press b until Control Panel Settings is selected.

3Press OK.

4Press _ or ` to enable or disable button sounds.

5Press OK.

Minutes to Standby

When the Kodak EasyShare All-in-One is idle for the standby power setting timeout period, it enters the Standby state. The On/Off indicator remains lit, but power consumption is reduced. When in the Standby

User’s Guide 21