Operation

Sequence of a time-controlled cooking programme, Using the residual heat

The Start time will be shown in the display up until the heating is switched on.

During the course of the programme, you can follow the temperature increasing in the display until it reaches the set temperature. A polyphonic tune will play when the set temperature is reached.

Then the Time left until the end of the programme will appear in the display.

The heating in the oven switches off shortly before the end of the cooking programme. Residual heat (Energy saving function) is then used. "Energy save phase" will appear in the display. The residual heat in the oven is sufficient to complete the cooking process.

The cooling fans continue to run, as do the hot air fans if a "fan" setting had been chosen.

At the end of the cooking programme

The oven heating switches off.

"Programme finished" and the O symbol appear in the display.

A polyphonic tune will play.

The cooling fans will continue to run for a while after the oven has been switched off to prevent any humidity building up in the oven, on the control panel or in the oven housing unit.

The fans are sensor-controlled and will switch off automatically. You can change this standard default setting. See "Settings - Cooling fan run-on".

Switch the oven off at the end of the programme.

Changing or deleting an entered cooking time

Selecting "Change" brings up all the options which can be changed.

^Select the option you want and change it.

Use the U sensor to delete the entered times.

If there is a power cut, all data entered will be deleted.

31

Page 31
Image 31
Miele H 5981 BP installation instructions At the end of the cooking programme, Changing or deleting an entered cooking time