Installation

Layout of the projector

Image size varies depending on the distance between the screen and the projector.

Front projection

 

 

W

A

B

H

 

Hd

A=B

 

ENGLISH

L

L : Between the screen and the front edge of the projector

Hd : Height of the projected image

 

 

Screen

 

 

 

 

 

Distance from the screen : L

 

 

Hd

 

 

 

 

 

 

 

 

 

 

 

 

 

Diagonal size

Width : W

 

Height : H

 

Shortest (WIDE)

Longest (TELE)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

inch

cm

inch

 

cm

inch

 

cm

inch

m

inch

m

inch

 

cm

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

40

102

32

 

81

24

 

61

55

1.4

68

1.7

1.8

 

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

60

152

48

 

122

36

 

91

84

2.1

103

2.6

2.7

 

7

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

80

203

64

 

163

48

 

122

112

2.8

137

3.5

3.6

 

9

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

100

254

80

 

203

60

 

152

141

3.6

172

4.4

4.5

 

11

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

150

381

120

 

305

90

 

229

212

5.4

259

6.6

6.8

 

17

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

200

508

160

 

406

120

 

305

283

7.2

345

8.8

9.0

 

23

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

250

635

200

 

508

150

 

381

354

9.0

432

11.0

11.3

 

29

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

300

762

240

 

610

180

 

457

425

10.8

13.5

 

34

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The above figures are approximate and may be slightly different from the actual measurements.

Front projection, ceiling mounting

For ceiling mounting, you need the ceiling mount kit designed for this projector. Ask a specialist for installation.

For details, consult your dealer.

The warranty on this projector does not cover any damage caused by use of any non-recommended ceiling mount kit or installation of the ceiling mount kit in an improper location.

When using the projector mounted on the ceiling, set IMAGE REVERSE in the INSTALLATION menu to MIRROR INVERT. See page 16.

When the projector is mounted on the ceiling, images may appear darker than those projected in the case of tabletop mounting. This isn’t a product malfunction.

Rear projection

Ask a specialist for installation. For details, consult your dealer.

Caution:

Placing the projector directly on a carpet impairs ventilation by the fans, causing damage or failure. Put a hard board under the pro- jector to facilitate ventilation.

Place the projector at least 50 cm (or 20 inch) away from the wall to prevent the air inlet grille and the air outlet grilles that emit hot air from being blocked.

Do not use the projector in the following locations and manners, which may cause fire or electric shock.

In a dusty or humid place.

In a sideways or upside-down position.

Near a heater.

In an oily, smoky, or damp place such as a kitchen.

In direct sunlight.

Where the temperature rises high, such as in a closed car.

Where the temperature is lower than +41°F (or +5°C) or higher than +95°F (or +35°C ).

Important:

Do not apply force to the lens, because the lens may be damaged.

We don't recommend using the projector at an altitude of 1500 meters or higher. Use at an altitude of 1500 meters or higher may affect the projector's life.

For rear projection, set IMAGE REVERSE in the INSTALLATION menu to MIRROR. See page 16.

EN-9

Page 9
Image 9
Mitsubishi Electronics XD500U user manual Installation, Layout of the projector, Front projection, ceiling mounting