GE GSM2260NSS dimensions GE Spacemaker Under-the-SinkDishwasher, From, cabinet, Cold, Front View

GSM2260N

GE Spacemaker® Under-the-Sink Dishwasher

Dimensions and Installation Information (in inches)

Note: Undersink dishwashers can be installed only under sinks and not under other appliances.

Plumbing—Hot Water Only: Use 3/8" O.D. copper tubing or 1/2" O.D. plastic tubing minimum inlet line. Water valve has 3/8" internal threads. Hand cut-off valve is recommended.

Electrical: Fuse circuit with 15 amp or 20 amp standard fuse or circuit breaker. Total amp load is

8.6.Dishwasher operates on 120V, 60HZ power, Two-wire cable (14 Ga. Min.) with ground must be installed.

Specifications: Inlet water temperature recommended—minimum 120°F at dishwasher. Inlet water pressure required—15 to 120 lbs./sq. inch.

Note: All rough-in, both plumbing and electrical, must be completed before the dishwasher is installed. All plumbing and electrical work must be in accordance with local codes.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

		FRONT VIEW
		Plumbing and
		wiring must enter
		within this area		Cold
	4	from either side,
		rear or bottom		Hot
6	19" From		Cable 24"
		wall
			from wall

2" From
cabinet	2" From	Ground	3
	floor
		Black (line)

White (neutral)

Listed by	As an Energy Star®
	partner, GE has determined
Underwriters
	that this product meets the
Laboratories
	Energy Star guidelines
	for energy efficiency.

Specification Created 10/07 350512