Brother HE 120 Replacing the Presser Foot, Presser foot precautions, Replacing the presser foot

SE-BrotherE_sgml.book Page 40 Monday, June 30, 2003 3:44 PM

GETTING READY ————————————————————————————————————————————

Replacing the Presser Foot

The presser foot presses down on the fabric.

Presser foot precautions

Be sure to observe the following precautions concerning the presser feet.

CAUTION

●Use the presser foot appropriate for the type of stitch that you wish to sew, otherwise the needle may hit the presser foot, causing the needle to bend or break.

●Only use presser feet designed specifically for this sewing machine. Use of any other presser foot may result in injuries or damage to the machine.

Replacing the presser foot

Replace the presser foot as described below.

aPress (Needle position button) once or twice to raise the needle.

1

aNeedle position button

•If the needle does not move when the needle position button is pressed, an animation is displayed on the LCD. Press the needle position button after touching the LCD.

XThe needle is raised.

bTurn off the sewing machine.

40

CAUTION

●Before replacing the presser foot, be sure to turn off the sewing machine, otherwise injuries may occur if the start/stop button is accidentally pressed and the machine starts sewing.

cRaise the presser foot lever.

1

aPresser foot lever

XThe presser foot is raised.

dPress the black button at the back of the presser foot holder.

1

2

aBlack button

bPresser foot holder

XThe presser foot holder releases the presser foot.