Brother HE 120 Thread runs out partway through a design, Stopping while embroidering, 158

SE-BrotherE_sgml.book Page 158 Monday, June 30, 2003 3:44 PM

EMBROIDERY —————————————————————————————————————————————

Thread runs out partway through a design

When the upper thread or the bobbin thread runs out while sewing, the sewing machine stops. Move the needle back about ten stitches and resume sewing.

aSet up the upper or bobbin thread.

bPress .

cPress (Back one stitch) to move the needle back about 10 stitches.

(Forward one stitch) increases the stitch number.

dRestart the embroidery.

Stopping while embroidering

If the embroidery is stopped before it is complete, check the current needle count before turning off the sewing machine.

Memo

zWhen the sewing machine is turned off, the embroidery size and layout return to the original setting.

aPress (Start/stop button) to stop the sewing machine.

bCheck the current needle count on the LCD and make a note of it.

If the needle count is not displayed, press (Settings key) to switch the display.

Press (Back key) to return to the embroidery screen.

cPress (Menu key).

X The screen for checking the pattern is displayed.

158