Brother HE 120 operation manual ITopstitch around the zipper, JRemove the basting stitching

SE-BrotherE_sgml.book Page 90 Monday, June 30, 2003 3:44 PM

UTILITY STITCHES ———————————————————————————————————————————

eAlign the seam with the center of the zipper, and then baste the zipper in place.

2

1

3

aWrong side of fabric b Basting stiching

c Zipper

fRemove about 5 cm (2 inch) from the end of the basting on the outside.

2 4

3 1

hSelect stitch 3 .

•For details, refer to "Selecting stitching" (page 47).

CAUTION

●When using zipper foot "I", be sure to select the straight stitch (center needle position), and slowly turn the balance wheel toward you to check that the needle does not touch the presser foot. If a different stitch is selected or the needle hits the presser foot, the needle may bend or break.

iTopstitch around the zipper.

aWrong side of fabric b Zipper basting

c Outside basting d 5 mm (2 inch)

gAttach the presser foot holder to the right pin of zipper foot "I".

1

1

2

3

I

2

aPin on the right side b Needle drop point

•For details, refer to "Replacing the presser foot" (page 40).

4

aStitching

bRight side of fabric c Basting stitching

d End of zipper opening

CAUTION

●When sewing, be sure that the needle does not touch the zipper, otherwise the needle may bend or break.

jRemove the basting stitching.

90