Brother HE 120 operation manual Replacing the Presser Foot, Presser foot is attached

SE-BrotherE_sgml.book Page 41 Monday, June 30, 2003 3:44 PM

————————————————————————————————————————————————————

ePlace a different presser foot below the holder so that the presser foot pin is aligned with the notch in the holder.

Position the presser foot so the letter indicating the presser foot type (A, G, I, J, M, N or R) is positioned to be read.

1

23

aPresser foot holder b Notch

c Pin

fSlowly lower the presser foot lever so that the presser foot pin snaps into the notch in the presser foot holder.

1

aPresser foot lever

XThe presser foot is attached.

gRaise the presser foot lever to check that the presser foot is securely attached.

Note

zWhen a stitch is selected, the icon for the presser foot that should be used appears in

the screen. Check that the correct presser

foot is attached before starting to sew. If the	1
wrong presser foot is installed, turn off the
sewing machine, attach the correct presser
foot, and then select the desired stitch again.

Buttonhole foot "A"

Overcasting foot "G"

Zigzag foot "J"

Button fitting foot "M"

Monogramming foot "N"

Blind stitch foot "R"

Side cutter "S"

Embroidery foot "Q"

zFor details on the presser foot that should be used with the selected stitch, refer to "Stitch Settings" (page 66).

Replacing the Presser Foot 41