Brother HE 120 Threading the needle, ACheck that the thread cassette indicator is lit up in green

SE-BrotherE_sgml.book Page 27 Monday, June 30, 2003 3:44 PM

————————————————————————————————————————————————————

mPull the thread under the disc at the front in the lower-left corner and around to the right, and then the thread will be cut with the cutter. Follow arrow 6 indicated on the thread cassette.

1

2

aDisc

b Cutter

XThe spool of thread is now loaded in the thread cassette.

Note

zBe sure the thread is cut as described above, otherwise the needle threader cannot be used to thread the needle.

Threading the needle

In this section, the procedures for installing the thread cassette and threading the needle are described. The

needle threader is used to thread the needle at the1 same time that the thread cassette is inserted.

Memo

zThe needle threader can be used with sewing machine needles 75/11 through 100/16.

zThread with a thickness of 130/20 or thicker cannot be used with the needle threader.

zThe needle threader cannot be used with the wing needle or the twin needle.

zIf the needle threader cannot be used, refer to "Thread the needle manually (without using the needle threader)" (page 30).

aCheck that the thread cassette indicator is lit up in green.

1

aThread cassette indicator

•If the thread cassette indicator is lit up in red, the needle has not been raised to the correct

position. Press (Needle position button) once to raise the needle.

1

aNeedle position button

Upper Threading 27