Brother HE 120 operation manual Needle can be removed from the needle bar, Needle is installed

SE-BrotherE_sgml.book Page 39 Monday, June 30, 2003 3:44 PM

————————————————————————————————————————————————————

cUsing the screwdriver, loosen the needle clamp screw.

dLower the needle-changing tool.

XThe needle can be removed from the needle bar.

eInsert the new needle into the hole in the needle-changing tool.

Insert the needle with the flat side of the needle toward the rear of the machine.

gInsert the needle until it touches the needle stopper, and then use the screwdriver to tighten the needle clamp screw.

1

XThe needle is installed.

hLowerneedle.the needle-changing tool off of the

Note

zThe needle-changing tool can not be used for the twin needle.

fLift up the needle-changing tool so that the fork hooks onto the needle clamp screw.

Replacing the Needle 39