Brother HE 120 Selecting stitching, Sewing, Attach the presser foot, CTurn on the sewing machine

SE-BrotherE_sgml.book Page 47 Monday, June 30, 2003 3:44 PM

————————————————————————————————————————————————————

Selecting stitching

Stitches are selected using LCD operations. There are 67 utility stitches. Right after turning the power on, the straight stitch (left needle position) is selected.

aDetermine the stitch to be used, and get the matching presser foot ready.

• Refer to "Stitch Settings" (page 66).

†Example: 11 is selected:

X The stitch is selected, and the stitch number

Attach the presser foot.

and settings are displayed.

2

b

The machine comes with zigzag foot "J" attached.

•For details, refer to "Replacing the presser foot" (page 40).

CAUTION

●Use the presser foot appropriate for the stitch. If the wrong presser foot is used, the needle may hit the presser foot and break or bend.

cTurn on the sewing machine.

XThe straight stitch (left needle position) is shown selected in the LCD.

dPress the stitch selection.

(Previous page key) displays the previous

screen, and (Next page key) displays the next screen.

eIf necessary, specify the setting for automatic reverse/reinforcement stitching and adjust the stitch length, etc.

Memo

zUses of stitches and other stitch selections are explained in "UTILITY STITCHES" (page 65).

zAutomatic reverse/reinforcement stitching and other settings are explained in "Useful Functions" (page 59).

Note

zWhen a stitch is selected, the icon for the presser foot that should be used appears in the screen. For details, refer to "Replacing the Presser Foot" (page 40). Check that the correct presser foot is attached before starting to sew. If the wrong presser foot is installed, turn off the sewing machine, attach the correct presser foot, and then select the desired stitch again.

Sewing 47