Brother HE 120 Checking the needle, Replacing the needle, Correct needle, Incorrect needle

SE-BrotherE_sgml.book Page 37 Monday, June 30, 2003 3:44 PM

————————————————————————————————————————————————————

Checking the needle

Sewing with a bent needle is extremely dangerous since the needle may break while the machine is being operated.

Before using the needle, place the flat side of the needle on a flat surface and check that the distance between the needle and the flat surface is even.

1

2

aFlat side

b Needle type marking

■Correct needle

1

aFlat surface

■Incorrect needle

If the distance between the needle and the flat surface is not even, the needle is bent. Do not use

abent needle.

1

Replacing the needle

Replace the needle as described below. Use the screwdriver and a needle that has been determined to

be straight according to the instructions in "Checking 1 the needle".

aPress (Needle position button) once or twice to raise the needle.

1

aNeedle position button

bTurn off the sewing machine.

CAUTION

●Before replacing the needle, be sure to turn off the sewing machine, otherwise injuries may occur if the start/stop button is accidentally pressed and the machine starts sewing.

cLower the presser foot lever.

aFlat surface

1

a Presser foot lever

Replacing the Needle 37