Brother HE 120 132, Turn the screwdriver toward the back, Remove the presser foot holder

SE-BrotherE_sgml.book Page 132 Monday, June 30, 2003 3:44 PM

EMBROIDERY —————————————————————————————————————————————

eLoosen the presser foot holder screw and remove the presser foot holder.

Turn the screwdriver toward the back.

2

13

aScrewdriver

bPresser foot holder

cPresser foot holder screw

XRemove the presser foot holder.

fSet the bar on the embroidery foot onto the needle clamp screw bar.

1

2

aEmbroidery foot bar b Needle clamp screw

gSecure the embroidery foot with the presser foot holder screw.

Set the embroidery foot perpendicular.

CAUTION

●Do not hit the needle with your finger or the embroidery foot "Q" when attaching it. The needle might break or cause injury.

●Be sure to tighten the screw with the included screwdriver. If the screw is loose, the needle might hit the presser foot and break or bend.

●Before sewing, always turn the balance wheel toward you slowly, and check to be sure that the needle does not hit the presser foot. The needle could be broken or bent.

hTighten the presser foot holder screw. Turn the screwdriver toward the front.

132