Brother HE 120 operation manual Thread cassette is raised

SE-BrotherE_sgml.book Page 25 Monday, June 30, 2003 3:44 PM

————————————————————————————————————————————————————

cPush the thread cassette eject lever on the left side of the machine toward the back.

1

aThread cassette eject lever

XThe thread cassette is raised.

•If the sewing machine is turned off, the thread cassette will not be ejected correctly.

dRemove the thread cassette.

ePull the cover of the thread cassette out toward you, and then pull off the spool cap that is inserted onto the spool pin.

1 1

2

3

aSpool cap (orange) b Spool pin

c Cover

fPlacespool thepin.spool for the upper thread onto the Slide the spool onto the spool pin so that the thread unwinds from the left, as seen from the top.

1

aSpool

gSlide the spool cap onto the spool pin. With the rounded side of the spool cap positioned toward the top, slide the spool cap onto the spool pin as far as possible until the down side of the spool touches the down end of the spool pin.

•Only the orange spool cap should be placed on the spool pin in the thread cassette.

Upper Threading 25