Brother HE 120 operation manual Adjusting the stitch length, Adjusting the Stitch Width and Length

SE-BrotherE_sgml.book Page 57 Monday, June 30, 2003 3:44 PM

————————————————————————————————————————————————————

CAUTION

●After adjusting the stitch width, slowly turn the balance wheel toward you and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break.

Adjusting the stitch length

The stitch length can be adjusted on the LCD.

aTurn on the sewing machine.

2

XThe LCD comes on.

bSelect a stitch.

■For groups other than utility stitches When selecting stitches in the decorative stitch, satin stitch, cross-stitch and combined

utility stitch groups, press after selecting the stitch.

XA screen containing settings for the selected stitch appears.

•For details on selecting a stitch, refer to "Selecting stitching" (page 47).

•Immediately after the stitch is selected, the standard settings (highlighted) appear.

cTo make the stitch length shorter, press .

To make the stitch length longer, press .

XThe stitch length is changed.

•If the setting is changed, the highlighted value is erased.

Adjusting the Stitch Width and Length 57