Brother HE 120 operation manual Embroidery step by step, 130

SE-BrotherE_sgml.book Page 130 Monday, June 30, 2003 3:44 PM

EMBROIDERY —————————————————————————————————————————————

Embroidery step by step

The basic steps for embroidery are as follows.

		Attach the embroidery foot "Q".
1	Presser foot attachment	For details on attaching the embroidery foot, refer to "Attaching the
		embroidery foot" (on the next page)
		↓
		Use a needle matched to the fabric.
2	Checking the needle	For details on replacing the needle, refer to "Replacing the needle" (page
		37).
		↓
	Embroidery unit	Attach the embroidery unit.
3		For details on attaching the embroidery unit, refer to "Attaching the
	attachment
		embroidery unit" (page 134).
		↓
		For the bobbin thread, wind embroidery bobbin thread and set it in
4	Bobbin thread setup	place.
		For details on setting up the bobbin thread, refer to "Winding/Installing
		the Bobbin" (page 18).
		↓
		Attach a stabilizer material to the fabric, and hoop it in an embroidery
5	Fabric preparation	frame.
		For details on preparing the fabric, refer to "Preparing the fabric" (page
		138).
		↓
	Embroidery frame	Attach the embroidery frame to the embroidery unit.
6		For details on attaching the embroidery frame, refer to "Attaching the
	attachment
		embroidery frame" (page 142).
		↓
		Turn the power on, and select an embroidery pattern.
7	Pattern selection	For details on selecting embroidery patterns, refer to "Selecting
		embroidery patterns" (page 144).
		↓
		Check and adjust the size and position of the embroidery.
8	Checking the layout	For details on ajusting the layout, refer to "Adjusting the layout" (page
		154).
		↓
		Set up embroidery thread according to the pattern.
9	Embroidery thread setup	For details on the thread setup steps, refer to "Upper Threading" (page
		23).

130