Brother HE 120 operation manual 168, Lcd

SE-BrotherE_sgml.book Page 168 Monday, June 30, 2003 3:44 PM

APPENDIX ——————————————————————————————————————————————

Symptom	Probable Cause	Remedy	Reference
Nothing appears	The brightness of the LCD is either	Adjust the brightness of the LCD.	page 172
in the LCD.	too light or too dark.
Machine does not	An animation is displayed on the	Touch the LCD with your finger, and	page 20,
operate when
	LCD.	the animation will disappear.	page 40
button is pressed.
Embroidery unit	No pattern selected.	Select a pattern.	page 144
	The embroidery unit is not set up
does not move.		Set the embroidery unit up correctly.	page 134
	correctly.
The embroidery	The flap is still attached.	Remove the flap.	page 134
		Pull the embroidery unit connector
unit cannot be	The embroidery unit connector
attached.		slot cover toward you and then push	page 135
	slot is closed.
		it all the way in.
	The fabric is not fully stretched on	Stretch the fabric properly on the	page 139
	the embroidery frame. The fabric
		embroidery frame.
	is loose.
		Always use stabilizer material for
		embroidery with stretch fabrics, thin	page 138
	No stabilizer material is attached.	fabrics, fabrics with a loose weave
		and fabrics where stitches easily
		contract.
	The thread is tangled and the	Remove the tangled thread. When	page 162
	shuttle, etc., is plugged up.	the shuttle is plugged up, clean it out.
	The thread tension is incorrect.	Adjust the tension of the upper	page 54
		thread.
		If the embroidery unit carriage or
	Objects are placed near the	embroidery frame bumps into
		objects, the pattern will be messed	page 135
	carriage or embroidery frame.
Embroidery not		up. Do not place objects within the
neatly done.		range of embroidery frame motion.
		Stretch the fabric on the frame once
	Material coming out of the	again so that the material coming out
	embroidery frame is causing	of the embroidery frame does not	–
	problems.	cause problems, rotate the pattern
		and embroider.
	A heavy fabric is being	If embroidery is done with the fabric
		hanging off the table, the embroidery	–
	embroidered, and the fabric is
		unit movement will be impaired. Fix
	hanging off the table.
		it so the fabric does not hang off.
	The fabric is catching. It is	Stop the sewing machine and set the	–
	pinched.	fabric up correctly.
	The carriage was moved while the	If the carriage is moved during the
	embroidery frame was being	process, the pattern may be messed	–
	removed or attached during	up. Be careful when removing or
	embroidery.	attaching the embroidery frame.

168