Setting remote control codes
Once you set the appropriate remote control codes, you can use this remote to control your other components. Note that some buttons may not correctly operate the selected component. Use the input selector buttons to select the component you want to operate. The remote control automatically switches to the appropriate control mode for that component.
■Default codes
The following table shows the default component (Library: component category) and the remote control code for each area.
Input area | Manufacturer | Code |
|
|
|
TV (DTV/CBL) | YAMAHA | 299 |
|
|
|
VCR | YAMAHA | 399 |
|
|
|
DVD (DVD/CD) | YAMAHA | 699 |
|
|
|
Note
You may not be able to operate your YAMAHA component even if a YAMAHA remote control code is initially set as listed above. In this case, try to set another YAMAHA remote control code.
■Setting a code
1Hold down CODE SET while doing steps 2 and 3.
CODE SET
2Press an input selector button to select the source component you want to set up.
DVD/CD | VCR | VIDEO 1 |
DTV/CBL | TUNER | VIDEO 2 |
REMOTE CONTROL FEATURES
3Press the numeric buttons to enter the three- digit remote control code for the component to be used, then release CODE SET.
STEREO HALL JAZZ ROCK
1 | 2 | 3 | 4 |
MUSIC | ENTERTAIN TV THTR | MOVIE | |
5 | 6 | 7 | 8 |
STANDARD NIGHT EXTD SUR. STRAIGHT
9 0 +10 ENT
EFFECT
Refer to “LIST OF REMOTE CONTROL CODES” at the end of this manual.
y
To reset an input area’s remote control code to the factory default, input the default code (see “Default codes” above) in step 3.
Notes
•If the manufacturer of your component has more than one code, try each of them until you find the correct one.
•If you wait for more than 10 seconds during step 3, the setup process is canceled. If this happens, start over from step 2.
•Replace the batteries frequently. The settings may be lost after two minutes without power supply.
•If the remote control code is successfully set, “Code Set OK” appears in the front panel display of this unit. If the setting is not successful, “Code Set NG” appears.
OPERATION | ADVANCED |
|
|
English
47
